últimos productos
Contáctenos
- El cuarto piso, una zona -} A3, área de negocios de aviación, Distli Distrct, Tianjin, China.
- >SalesManager@Coilwinding
machinechina.com - +8613072088960
Bobinadora interna de 4 estaciones completamente automática de 4 estaciones
3. Technical requirements for stator winding1.1. Workpiece descriptionA total of 1 product workpiece stator, respectively: outer diameter inner diameter stack height (not including the frame)1.120mm86mm28mm (The outer diameter is the same, but the stack height can be adjusted.)3.1.1 For winding requirements, please refer to Party A's drawings. The dimensions are designed with reference to the samples provided by Party A. (Party B is only responsible for the sample size. If it is involved in a situation that is inconsistent with the sample size, Party B will not bear the corresponding responsibility, but the height can be adjusted. ).3.1.2 The test after the equipment is wound meets the salt water pinhole test requirements of Party A (3 meters not more than 1 point), and the qualified rate of finished products is 100 percent within the allowable range of the parameters.
Descripción
NAME:GW-IN200-4 Full automatic 4 station internal winding machine
ESPECIFICACIÓN
Número de bobinado | 4 | Contando Accuary | 0.5 vueltas |
Modelo | GW-IN200-4 | Acuario de línea | 0.01mm |
máxima velocidad | 600 rpm/min | Número de control | Servocontrol Yaskawa de 5 ejes |
Diámetro de bobinado óptimo | 0.05mm-1.2mm | potencia de la máquina | 11KW |
Precisión de línea | 0.01mm | Presión de trabajo | 0.4-0.7Mpa |
Número de ranura del estator | 2,3,4,6,8,9,12....... | Potencia de entrada | CA380V 50/60HZ |
Diámetro interior del estator aplicable | Mayor o igual a 10 mm | Peso de la máquina | 1000KGS |
Diámetro exterior del estator aplicable | Menor o igual a 120 mm | Dimensiones totales | 150012001950MM |
Aplicar altura de pila de núcleo de hierro | Menor o igual a 100 mm |
Features :
1. The wire can be wound on any track by moving the wire mouth up and down and rotating the iron core. Therefore, by changing the computer winding program to correspond to different core stack thickness and different core pole number of winding. 2. Any abnormal operation, failure state to man-machine dialogue mode prompt operation, maintenance.
3. The number of winding loops can be set arbitrarily in the way of thread, and the specified 360 degrees can be stopped at any position, so that the wire passing is simple and convenient and the overall production efficiency is shortened.
4. When winding, the number of coils can be changed flexibly in each layer to realize different types of products.
5. Product programming is simple and convenient, with a unique special software, unlimited upload download storage. Easy to master with simple training.
6. Due to the high-performance control system and Servo Motor, it can ensure the stability of the position of the wire and shorten the time. Kill.
7.According to customer requirements can choose manual or automatic manipulator loading and unloading mode.
8. Cada unidad ha sido estandarizada, fácil de reemplazar y desmontar.
Etiqueta: Máquina bobinadora interna de 4 estaciones completamente automática de 4 estaciones, China, proveedores, fabricantes, fábrica, precio, hecho en China
Accessories Model
NO. | NOMBRE | MODELO | ESPECIFICACIÓN | MARCA |
1 | 400W Servo motor（2PCS） | 安川 | ||
2 | 3000W Servo motor（2PCS） | 安川 | ||
3 | 4000W Servo motor（1PCS） | 安川 | ||
4 | 400W Servo controller（2PCS） | 安川 | ||
5 | 3000W Servo controller（1PCS） | 安川 | ||
6 | 4000W Servo controller（2PCS） | 安川 | ||
7 | IO module（32IN 32OUT） | 安川 | ||
8 | M-3 Communication cable | 安川 | ||
9 | CPU module | 安川 | ||
10 | Base unit MBU304 (Single slot） | 安川 | ||
11 | Estacion terminal | 安川 | ||
12 | IO Cable | 安川 | ||
13 | Comunicación Servo Conector CN1 | 安川 | ||
14 | Resistencia de terminación | 安川 | ||
15 | Pantalla táctil | 10 inch | 威纶 | |
16 | Relé intermedio | 施耐德 | ||
17 | Base de relé | 施耐德 | ||
18 | Fuente de alimentación conmutada de 24V | 施耐德 | ||
19 | contactor de CA | 施耐德 | ||
20 | C16 El disyuntor | 施耐德 | ||
21 | C60 El disyuntor | 施耐德 | ||
22 | Botones | 施耐德 | ||
23 | Elemento de tratamiento de fuente de aire | 亚德客 | ||
24 | Presostato electrónico con pantalla digital | 亚德客 | ||
25 | Interruptor de inducción | 亚德客 | ||
26 | Cilindro de tijeras | Diámetro 32, carrera 10 | 亚德客 | |
27 | Cilindro elevador de tijera | Diámetro 25, carrera 20 | 亚德客 | |
28 | Cilindro de transferencia de aguja | Diámetro 16, carrera 100 | 亚德客 | |
29 | Cilindro de molde | Diámetro 40, carrera 15 | 亚德客 | |
30 | La válvula electromagnética | 3 links ,2 positions | 亚德客 | |
31 | conector | 2 pieza de conexión | 亚德客 | |
32 | tensor | 亚博 | ||
33 | CC24V | 台邦 | ||
34 | Sensor de origen | 欧姆龙 | ||
35 | Límite de cambio | 欧姆龙 | ||
36 | Selector de segunda marcha | 施耐德 | ||
37 | Botón verde normalmente abierto | 施耐德 | ||
38 | Botón rojo normalmente cerrado | 施耐德 | ||
39 | reja de seguridad | CC24V | 德国劳恩 | |
40 | Tornillo | 台湾上银 | ||
41 | Guía | 台湾上银 | ||
42 | Transformador | 12KW | 中科 |
También podría gustarte
